Share This Post:

How To Connect Your Cisco SPA3102 Voice Gateway to Your Computer

Step 1: Connect Network Cable

Disconnect the network cable from your computer and connect it to your SPA3102’s INTERNET port.

Step 2: Connect Ethernet Cable

Take the Ethernet network cable included with your SPA3102 and connect one end to the SPA3102’s  ETHERNET port. Connect the other end to your computer’s network port (the one you disconnected the network cable from in step 1).

Step 3: Connect the Phone Cable

Connect the RJ-11 phone cable included with your SPA3102 to the SPA3012’s LINE port. Connect the other end to your telephone jack (wall jack, MagicJack, Ooma, Vonage adapter, etc)

Step 4: Connect Analog Telephone

(Optionally) Connect an analog telephone to your SPA3102’s PHONE port using a separate RJ-11 phone cable. You only need to do this if you wish to connect your analog phone to the Voice Modem.

Step 5: Attach Power Adapter

Connect the included power adapter to your SPA3102’s power port and plug the power adapter to an electric power outlet.

Step 6: Connection Test

Check your connection. Once the unit is powered on, your computer should regain its network connection. Open a browser and make sure you can still get on the internet.

If you connected a regular telephone in step 4, you should be able to use it to make and receive phone calls.

Share This Post:

This entry was posted in Analog Phone Integration. Bookmark the permalink.