Share This Post:

Running Voicent on Windows Server 2008 R2 Data Center Edition

I’ve got a couple questions about your broadcast by phone software. can it be run on Windows Server 2008 R2 Datacenter Edition? how much server load is there when running? does it “play well” with other software on the server like email server or banner ad software? can it be configured to use the data in an existing MSSQL database?

Voicent will work just fine on Windows Server R2 Datacenter. The load on the server is proportional to the amount of simultaneous channels being used to make calls with. As a base, without accounting for other software, you should have a dual core cpu with 3gb of ram to run between 10 and 20 channels. For each additional 4-10 channels you should have another CPU core. If you are using real time TextToSpeech you should figure on the lower side of that spectrum. For RAM we suggest 70MB per channel above the base. For internet speed we recommend 64Kbs per channel in both download and upload speed.

Voicent should run fine with other software products as long as they don’t occupy the needed resources listed above.

Voicents IVR Studio has actions to interact with mySQL. IVR applications can be deployed to enhance messages and menus for BroadcastByPhone, BroadcastBySMS, AutoReminder, FlexPBX as well as using standalone with the Voicent Gateway for both incoming and outgoing calls.

Share This Post:

This entry was posted in Auto Dialer. Bookmark the permalink.